How Much Does Pressure Washing Cost?

Typical Range:

$212 - $447

Find out how much your project will cost.

Cost data is based on actual project costs as reported by 49,300 HomeAdvisor members. Embed this data

How We Get This Data

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

  • Homeowners use HomeAdvisor to find pros for home projects.
  • When their projects are done, they fill out a short cost survey.
  • We compile the data and report costs back to you.

Updated August 3, 2022

Reviewed by Robert Tschudi, Expert Home Building and Remodeling Contributor.

Written by HomeAdvisor.

The cost of pressure washing ranges between $212 and $447, with an average cost of $310 nationwide. Costs vary depending on the size of the area you intend to wash.

Powerwashing Cost Calculator

Let's calculate cost data for you. Where are you located?

Where are you located?

National Average $310
Typical Range $212 - $447
Low End - High End $100 - $700

Cost data is based on actual project costs as reported by 49,300 HomeAdvisor members.

Pressure Washing vs. Power Washing

The only difference between power and pressure washing is heat. Power washing uses heat to create "wet steam," while pressure washing uses cold water. Otherwise, the machines and methods are identical. They use the same force of water and the same optional cleaners.

Pressure Washing Costs and Rates

You’ll spend an average of $0.40 per square foot for a professional power washer or anywhere from $25 to $100 per hour, depending on the size and type of the job and the equipment needed. However, most pros simply charge a flat rate of $90 to $200, on average.

You can buy or rent pressure washers and use them to clean almost anything outside. They work by pressurizing water from a garden hose and forcing it out of a spray wand. Homeowners can get an electric or gas pressure washer for occasional use.

Per Hour

Pressure washing ranges from $50 to $100 per hour per crew member. For example, you might pay $300 per hour for a crew of three, but the job will take a third of the time it would take a single worker.

Per Square Foot

Pressure washing costs $0.10 to $0.50 per square foot. However, you’ll tend to pay less per square foot for larger projects. You can expect a minimum cost of around $100 to cover equipment, licensing, insurance, travel, and other fixed overhead costs.

Compare Local Quotes to Power Wash Your House
Compare Quotes

Average Cost to Pressure Wash a House

You’ll pay anywhere from $150 to $2,500 to pressure wash a home, depending on how many stories it has. Your location, too, plays a significant role in determining the price. 

Siding

You’ll pay anywhere from $150 to $1,400 to power wash most siding projects. However, if you’re doing the entire home, you might spend up to $2,500. Professionals use very low pressure for siding; high-pressure washing can severely damage most types of siding.

Roof

You’ll spend $0.50 to $1 per square foot to pressure or power wash a roof. Pressure or power washing roofs tends to be more expensive per square foot, since it takes more setup time and is harder to reach. The average cost to clean a roof is $440.

Driveway

It’ll cost you anywhere from $100 to $500 to pressure wash a driveway. If you want to wash your sidewalks at the same time, it could cost an additional $50 to $100. Expect to pay between $0.20 to $0.40 per square foot for most outdoor concrete surfaces, including pools, patios, and walkways.

Deck or Patio

Power washing a deck costs an average of $250 to $400. Professionals usually use power or pressure washers with less pressure to clean a deck, since it can be damaged by higher pressure washers.

Gutters

You’ll spend $50 to $300 to power wash gutters, or $0.50 to $1.50 per linear foot. Standard gutter cleaning costs $120 to $225.

Fencing

It typically costs between $150 and $300 to power wash most fences. Wood fences may cost extra since they take more time.

Garage Floor

It costs between $100 and $200 to pressure or power wash a garage floor. The cost may be higher if the floor is significantly stained, moldy, or greasy.

Whole House Pressure Washing Price List by Location

CityTypical Range
Atlanta, GA$150 – $325
Charlotte, NC$150 – $300
Denver, CO$150 – $350
Miami, FL$125 – $325
Minneapolis, MN$250 – $450
New York, NY$250 – $500

Residential vs. Commercial Building Pressure Washing Prices

You’ll pay anywhere from $0.10 to $1 per square foot for commercial pressure washing, while residential costs about $0.50 per square foot. Commercial pressure washing can be more expensive, since it often involves hard-to-reach spots on tall buildings and difficult roofs.

Electric vs. Gas Washers for House Exteriors

There’s very little difference in price between gas or electric power and pressure washers. They both cost between $100 and $3,000. Large residential and commercial washers range anywhere from $2,500 to $15,000. Corded electric washers are less portable since they need to be plugged in, while gas and cordless/battery-powered washers can go anywhere.

DIY Cleaning vs. Hiring Pressure Washing Services

While you can buy high-powered power and pressure washers at local home improvement stores, companies have the knowledge and experience of working safely with these products. Consider the pros and cons of renting power washers versus hiring a service. Professionals know how to target your home’s exterior, decks, patios, and driveways without damaging your home.

Pressure or Power Washer Rental Prices

It costs $35 to $175 per day to rent a power or pressure washer.

How Much Does a Pressure or Power Washer Cost?

Residential pressure or power washers cost from $100 to $1,000. If you own a boat, RV, or something that requires frequent washing, investing in a power washer could be the more affordable option. However, for occasional jobs, hiring a pro tends to cost far less.

DIY Hazards

If you do decide to pressure or power wash yourself, there are a few things to keep in mind. These include:

  • Looking for damage in the machine-like cracked hoses, broken seals, or rust on the nozzle.

  • Reading the safety instructions.

  • Wearing safety goggles or a face shield.

  • (If you are) using cleaning solutions, pre-water and, if possible, cover foliage.

  • Not standing too close when spraying the area.

  • Choosing the right nozzle. 40-degree nozzles are best for siding and decks, while a 0-degree nozzle is good for removing mud and stains on driveways.

Have More Questions About Power and Pressure Washing?
Ask Local Pros

FAQs

How much does it cost to pressure wash a 2-story house?

It’ll cost $400 to $1,400 to power wash the entire exterior of a 2-story home. Your location will also play a significant role in how much you’ll pay.

How much does it cost to soft wash a house?

It’ll cost $300 to $900 to soft wash the outside of most homes. This process uses low-pressure water and sometimes a bristle brush with a light cleaning solution. You can also buy a spray-on cleaner that attaches directly to a garden hose for a DIY solution.

How long does it take to pressure or power wash an exterior house?

It’ll take anywhere from 30 minutes to 3 hours to power wash a home, depending on how accessible and dirty the home is.

Will power washing harm my siding or driveway?

Power washing can harm both your siding and your driveway. If you’re not sure whether power washing is a good fit for your home, you should hire a professional to inspect your home and recommend the best method of cleaning. Depending on the surface, you may also want to consider sandblasting your home. Sandblasting costs $990, on average.

What are some tips for hiring power or pressure washing services?

To be sure you hire the best service for your job, you should speak with several professionals in your area. Some questions to ask your potential professional:

  • Are you bonded?

  • Do you have general liability coverage and/or worker's compensation?

  • What are your certifications?

  • Can you provide references for previous power/pressure projects?

  • In municipalities where required: What type of water reclamation system will you use

  • Will you use my water or supply your own? (Make sure they don’t charge you for your water use.)

  • Can you provide an estimate with line items for soap, labor, equipment, and detail the size of the project? The price should also include labor, time, and size of the area they're going to clean.

Do pressure washing companies use your water?​

Most pressure washing companies use your water when completing a job. However, some companies will bring their own water trucks.