How Much Does It Cost to Upgrade or Replace an Electrical Panel?

Typical Range:

$519 - $2,141

Find out how much your project will cost.

Cost data is based on actual project costs as reported by 23,988 HomeAdvisor members. Embed this data

How We Get This Data

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

.

  • Homeowners use HomeAdvisor to find pros for home projects.
  • When their projects are done, they fill out a short cost survey.
  • We compile the data and report costs back to you.

Updated December 16, 2024

Reviewed by Salvatore Cutrona, Angi Expert Review Board member and founder of Cutrona Electric, LLC, in Sherman, CT

Written by HomeAdvisor.

This article was updated using automation technology and thoroughly reviewed for accuracy by HomeAdvisor Editor Ryan Noonan.

Cost to Upgrade an Electrical Panel

The average cost to upgrade or replace an electrical panel is $1,313, with most electrical panels priced between $519 and $2,141. Costs range from $800 to $4,000 depending on the amperage required for your home or whether you're replacing or installing a new panel. Most homes have an electrical service between 100 to 200 amps, which puts you at the lower end of the price point, but some residential homes have a 400-amp panel, which may increase the price to $2,000 to $4,000.

Upgrades that keep the same amperage and wiring run the least. When you need an upgrade for added usage or modernization, many aspects may affect the total. Before you commit to an upgrade, consider all of these cost factors.

Get Quotes for Your Electrical Upgrade From Local Pros
Compare Estimates

Electrical Panel Upgrade Cost Calculator

Let's calculate cost data for you. Where are you located?

Where are you located?

National Average $1,313
Typical Range $519 - $2,141
Low End - High End $125 - $4,400

Cost data is based on actual project costs as reported by 23,988 HomeAdvisor members.

Cost to Upgrade a Panel by Amperage

The cost to upgrade an electrical panel is $800 to $4,000 for most jobs, but the price to hire an electrician ranges from $40 to $250 per hour. Clients can expect to pay around $1,500 for their project labor, depending on the project.

An average upgrade takes about 4 to 8 hours to complete. This does not include rewiring or installing new electrical wiring.

Amperage Costs
100 $800 – $1,500
150 $1,300 – $1,600
200 $1,300 – $2,000
400 $2,000 – $4,000

100 Amp Upgrade

The cost to update an electrical panel to 100-amp service is $800 to $1,500. The box runs from $100 to $200, so labor is the biggest part of the total.

Older homes often run low-amperage boxes because they didn't have central air, modern appliances, or today's electronics in mind when they were built. If you have a 60-amp unit, upgrading may make it easier to consider improvements like a workshop or hot tub.

150 Amp Upgrade

The price to upgrade your electrical panel to a 150-amp service is between $1,300 and $1,600 on average. The box alone costs between $150 to $250.

Upgrading to a 150-amp service is the typical starting range for an average-sized home, but if you use more electricity, you’ll want to upgrade to a 200-amp service.

200 Amp Upgrade

A homeowner should expect to pay between $1,300 and $2,000 to upgrade an existing unit to 200-amp service, including professional installation. Alone, a 200-amp box will cost $250 to $350.

An increase to 200-amp service gives you room to grow. Homes with additions or large garages and hefty electrical equipment may need added amperage to support the extra power draw.

400 Amp Upgrade

The cost to upgrade to a 400-amp service ranges from $2,000 to $4,000. This includes the panel at around $500, plus eight to 20 hours of labor to install the panel. The total for installation depends mostly on the setup. In some cases, your electrician will install two 200-amp panels, using one of them as a subpanel. Although these models run about half the price of a 400-amp one, labor for two takes longer.

Most homes don’t need this much power. If you have a large house in an area with hot summers, or you use jetted tubs regularly, it may be a great choice.

Get Quotes for Your Electrical Upgrade From Local Pros
Compare Estimates

Before You Start: Breaker, Panel, or Subpanel?

Whether it's a farmhouse in the country or a large commercial complex in the city, electrical systems are essential to most homes. That’s why it’s important to know and identify each part of your electrical panel while budgeting for that upgrade.

  • Electrical panel: An electrical panel is also called a breaker panel, breaker box, or service panel. It contains all of the breaker switches in your home.

  • Circuit breaker: Inside the electrical panel, you’ll find the circuit breakers that control the power in your house.

  • Subpanel: The subpanel is a smaller panel that controls specific sections of your home, such as your kitchen, bathroom, or garage.

  • Fuse box: Some older houses have a fuse box instead of a circuit breaker.

Circuit Breaker vs. Fuse Box

Replacing a fuse box with a breaker box costs between $1,500 and $2,000.If the wiring needs a complete overhaul, you may spend up to $4,500. Both options control the electrical current in your home, butfuse boxes use wires that melt during an overload and must be replaced, while circuit breakers use a magnetic switch that can be resetand doesn't need replacing.

Additional Upgrades or Changes

Upfront costs are straightforward when it comes to the price of the electrical panel by amperage and hourly installation rates, but you’ll find there are many upgrades and changes that can influence the final price of your project.

Cost of Changing Inside vs. Outside Electrical Panels

Moving an electrical panel outside costs between$1,500 and $2,500. If you also need to move your electrical box, expect to pay on the higher end of that range. This price includes outdoor equipment and wiring to reach the new location.

Electrical panels and electrical boxes serve different purposes. The electrical box is the main connection with an emergency shutoff, and current regulations often require it to be installed outdoors. This allows firefighters to safely and quickly shut off power from the exterior in case of a fire. Homes older than 15 years may still have indoor boxes.

Project estimates increase if a professional must tear out the panel or wiring to perform the necessarywork. Drywall repair costs $300 to $900 or about $50 to $75 per square foot.

Cost to Replace Fuse Box With Circuit Breaker Panel

The cost to replace the fuse box with a circuit breaker panel is between $1,500 to $4,500 on average. This is because fuse boxes are often on older homes that weren’t built for higher amperages. Your electrician will need to completely rewire your home to accommodate for the upgrade as well as the new breaker panel.

Cost to Move or Remove Electrical Panel

Estimated rates for moving a panel from one area of the home to another range from $1,000 to $3,000. Actual costs can vary depending on several project factors:

  • Whether the unit is indoors or outdoors

  • How many floors are in the home

  • How many circuits will move

  • Whether the code allows using the existing box as a junction point

Where extensive work is required, you may need to have your home completely rewired. The price to rewire a house is between $6 and $10 per square foot, or between $12,000 to $20,000.

Average Price to Install or Replace a Main Breaker

The price to install a new main breaker box is about $500 to $2,000. The exact cost depends on the number of circuits and the amperage of the unit. If the main box is full, installing a subpanel will allow you to add more circuits. You may also need to provide power to new rooms when remodeling or building additions.

Subpanel Installation Cost

The cost to install a subpanel is $400 to $2,000. The price of your subpanel depends on the amperage and the number of circuits. Models have four to 20 or more circuits, and the amperage ranges from 100 to 150 amps.

Subpanel Amperage Subpanel Cost (Installed)
100 $400 – $1,000
125 $500 – $1,250
150 $600 – $2,000

In most cases, you’ll install the subpanel near the main panel. Just make sure you have about three feet of clearance around the unit.

If you’re planning a home addition, a mother-in-law suite, or an in-ground pool, you should think about the power you’ll need to run electricity to these locations, too. A subpanel can be a great choice to increase your total amperage or add extra circuits.

Electric Meter Box Installation or Replacement Cost

The cost to install or replace an electric meter box ranges from $200 to $2,100. Simple installations or replacements may cost between $200 and $800, while more complex projects can range from $500 to $2,100, depending on labor and materials.

New Meter Base Cost

A new meter box costs $50 to $250 each. You’ll need to replace it if it’s damaged, increasing the amperage of your service, or you need one with more circuits.

Cost to Replace Service Entrance Cable

The cost to replace a service entrance cable ranges from $1,000 to $1,500 for overhead lines but may run $5,000 or more if it’s underground. Your local utility company usually does this project, so you’ll need to call them for an estimate.

Additional Wiring

Additional wiring can quickly add up and become a confusing tangle of expenses if you’re not keeping an eye on the extent of your project. Here’s a breakdown of additional wiring to be on the lookout for as you budget.

Cost of Adding New Electrical Panel and Wiring

The cost to install electrical wiring or panels is $1,500 to $12,000. The total depends on the amount you need to replace. Panel upgrades are not always independent projects. You might have to deal with:

  • Old wiring

  • Worn outlets

  • Outdated fixtures

  • Damaged circuits

Electricians who notice extensive wear and tear may recommend upgrades to other components. Necessary updates can significantly increase the costs of a given project, but they support a safe and functional power system.

Rewiring an Electric Panel

Rewiring an electric panel costs $1,500 to $12,000, depending on the extent of the job. If your house needs all new wiring, you’ll pay the most. Replacing one or two circuits runs less.

Replacing an electric panel sometimes calls for rewiring, but it’s hard to tell without speaking to a professional during a consultation. If you’re on a tight budget, it’s better to ask a pro about the condition of your system before you get started.

Cost to Repair Wiring

Repairing existing wiring can vary widely in cost depending on the extent of the damage and local labor rates. Homeowners should get estimates from local electricians to determine the exact cost.

Copper Grounding

Grounding your panel is essential for safety. The cost of grounding materials, such as copper, varies based on market prices and regional factors. Consult a licensed electrician for accurate pricing.

Get Accurate Quotes From Local Pros
Find Local Costs

Replacement or Repairs

Replacing or repairing old parts of your current electrical box or fuse setup can help you save on overall costs if the project is minor. In other cases, the cost to repair an old piece of equipment will far exceed the practicality of simply upgrading to a new one. Here’s what you need to know to make the best decision about your electrical equipment.

Federal Pacific & Zinsco Panel Replacement Costs

The cost to replace a Federal Pacific or Zinsco panel ranges from $1,500 to $4,000. Since these are older systems, this includes some upgrades to wiring. If you have one, you’ll want to call a pro as soon as possible to upgrade. The panels have design flaws that could cause a house fire.

These companies sold a series of faulty circuit panels, primarily in the 1960s through the 1980s. The breakers wouldn’t trip, which started several fires. Other brands’ boxes, like Challenger or PushMatic, had similar problems.

Cost to Replace Circuit Breaker Switch or Fuse

The cost to replace a circuit breaker switch or fuse is $100 to $250. Standard, 15- to 20-amp switches run $5 to $15 each. Standard, 15- to 20-amp fuses come in three packs for about $5 to $10.

Older circuits and fuses may be difficult to find and cost up to $70. The price for the installation should be about the same.

Fuse Box Replacement Cost

A fuse box replacement costs between $200 to $2,000. It depends mostly on the size of the box and how easy it is to find parts. Fuse boxes are old technology, which can be harder to replace in some cases. If you’re not looking to upgrade to a circuit breaker panel, ask your electrician if they have experience with the project.

Material Costs

Material costs are generally low, while the cumulative costs for rewiring, replacing wiring, and hiring a professional are where you’ll see the largest price increases. Here’s a breakdown of the material costs.

Electrical Panel Costs

Retail price of the panel itself is $100 to $500 or more. Total material costs depend on the type of unit and features you choose. In some cases, the local power company will need to install a new power supply and meter to meet the property's new electrical needs. Meters cost $100 to $650 to replace. Small materials like fittings, connectors, and fasteners usually total less than $100.

Amps Cost
100 $100 – $200
150 $150 – $250
200 $250 – $350
400 $500+

GFCI vs. AFCI Breaker Cost

AFCI and GFCI breakers can cost $30 to $60 each, up to 10 times the price of standard versions. These units offer extra protection to help reduce the likelihood of electrical hazards, like fires or electrocution. Code requires this type of protection in areas of the home such as common rooms, bedrooms, bathrooms, and kitchens.

  • Arc fault circuit interrupter (AFCI) breaker models: Cost between $25 to $60 and help protect against damaged wiring.

  • Ground fault circuit interrupter (GFCI) models: Cost between $35 to $50 on average and help to protect against water damage.

When the system needs both types, you have two choices. You can either use a combination AFCI/GFCI breaker or an AFCI breaker with a GFCI receptacle. They run about $40 to $60 at home improvement stores. These units are usually cheaper than buying the specialty products separately.

Signs Your Electrical Panel Needs an Upgrade

If you're unsure whether it's time to upgrade your electrical panel, consider these signs:

  • Your current panel provides less than 100 amps.

  • The panel shows physical damage.

  • You frequently unplug appliances to use others.

  • Your electrical box is located indoors.

  • Your home is over 20 years old without any electrical upgrades.

  • The breakers keep tripping.

  • Lights frequently flicker.

Can I Upgrade My Electrical Panel Myself?

Upgrading an electrical panel is a complex and hazardous task that should be left to a licensed professional. Handling electrical wiring without proper training poses serious safety risks, including electrocution and fire hazards. A certified electrician will obtain the necessary permits, coordinate with your local power supplier, and ensure the work meets all current codes and safety standards. Hiring a professional keeps your family safe and prevents costly mistakes.

When you decide to upgrade, start by finding licensed and insured electricians near you. Get quotes from at least three different contractors. Make a final decision based on trust, cost, experience, and reputation.

Hire a Reputable Electrician Near You
Find Pros

How HomeAdvisor Gets Its Cost Data

No place is more important than your home, which is why HomeAdvisor connects homeowners with local pros to transform their houses into homes they love. To help homeowners prepare for their next project, HomeAdvisor provides readers with accurate cost data and follows strict editorial guidelines. We surveyed over 10,000 real customers about their project costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.

Frequently Asked Questions

Does upgrading an electrical panel increase my home value?

Upgrading an electrical panel may not significantly increase your home's value, but it can make your property more appealing to potential buyers. A modern electrical panel enhances safety and meets current electrical demands, offering peace of mind to home buyers. This can make your home easier to sell and potentially lead to higher offers when the time comes.

How much is it to upgrade an electrical panel from 100 to 200 amps?

Upgrading an electrical panel from 100 to 200 amps costs between$750 and $2,000, not including the cost of running new wiring for additional circuits. This upgrade increases your home's electrical capacity, allowing you to safely use more appliances and modern electrical devices without overloading your system. It's a valuable investment for homes with growing electrical needs.

Do I need a permit for panel upgrades?

Yes, in most circumstances, you will need a permit to upgrade your panel. Contact your local building department if you’re upgrading the breaker box, moving it, upgrading your amperage service, or adding a new subpanel. If you’re just replacing a light switch, receptacle, or single breaker in the electrical box, you may not need a permit, but it’s always a good idea to check or speak to a professional.

When should I upgrade my electrical panel?

You should upgrade your electrical panel when your current system no longer meets your home's electrical demands. Signs that an upgrade is necessary include the panel being over 25 years old, you requiring more power than your existing system provides, adding new electrical systems or appliances, your home relies heavily on power strips due to insufficient outlets, or you constructing additions to your home. Upgrading ensures safety and accommodates increased electrical usage.

How much does it cost to get electricity connected and a new panel installed in a new house?

Getting electricity connected and a new panel installed in a new house can vary in cost. If existing power lines are close, the connection may be free; otherwise, expect to pay $25 to $50 per foot for remote properties. If power lines are distant, costs may increase up to $1,000. Installing a new electrical panel ranges from $800 to $4,000, depending on the amperage and specific requirements.

How long does it take to replace an electrical panel?

Replacing an electrical panel typically takes four to eight hours, depending on the complexity of the job. If you're installing multiple units, the time required can double. Additional factors that may extend the timeframe include accessing wiring inside walls, which can increase both the duration and cost of the project by $150 to $450. Coordinating with your electrician can help ensure a smooth and timely replacement.