We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers' needs. It is our mission to provide excellent workmanship, and complete customer satisfaction from start to completion of a project. In order to understand the needs, and expectations of our customers, we take great care to work, and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
We take great pride in our experience, expertise, quality, and customer service that we provide to meet the consumers' needs. It is our mission to provide excellent workmanship, and complete customer satisfaction from start to completion of a project. In order to understand the needs, and expectations of our customers, we take great care to work, and communicate with every customer in a professional manner. Our reputation is based on service, safety, and quality, regardless of how large or small the job.
sales and service of outdoor power equipment residential/commercial
sales and service of outdoor power equipment residential/commercial
We offering financing with the State of Michigan and a private loan company. We are DHS approved. We do subcontracting, we are fully insured. We do residential and commercial. Free quotes on new units, and run specials all the time just call and ask.
We offering financing with the State of Michigan and a private loan company. We are DHS approved. We do subcontracting, we are fully insured. We do residential and commercial. Free quotes on new units, and run specials all the time just call and ask.
Diseños Ornamental Iron is family owned and operated with more than 40 years of ironwork expertise. Our principal activity is ornamental iron contracting on residential and commercial projects. Estimates are free!
"After weeks of them screwing up the estimates (in fairness I did change the project scope once) they determine they're not interested in the project. Apparently me correcting multiple errors on their part made me too difficult to work with. Don't waste time with these people"
Kelly M on September 2020
Diseños Ornamental Iron is family owned and operated with more than 40 years of ironwork expertise. Our principal activity is ornamental iron contracting on residential and commercial projects. Estimates are free!
"After weeks of them screwing up the estimates (in fairness I did change the project scope once) they determine they're not interested in the project. Apparently me correcting multiple errors on their part made me too difficult to work with. Don't waste time with these people"
Kelly M on September 2020
Welding and Fabrication: Tig and Mig Welding. Structural, framing, fencing, concessions, canopy units, special orders. Aluminum alloy. Experienced in Stainless Steel as well.
Welding and Fabrication: Tig and Mig Welding. Structural, framing, fencing, concessions, canopy units, special orders. Aluminum alloy. Experienced in Stainless Steel as well.
Haskell Service Company, family owned and operated by Chuck Haskell since 1985, originated as a residential contracting company in Auburn, Maine before coming to Michigan in 1995 as a heavy maintenance/ fascilities contracting company. Originally meeting the needs for Meijer,Inc., HSC later performed services for businesses such as U of M Flint, national accounts such as Lowes, Barnes and Noble, Marriott Hotels, Sheraton Hotels, JoAnn Fabrics, Radio Shack, Home Goods, and World Market. Government accounts such as NOAA, US Geological Survey, and Superior Township Utilities, insurance work, property management of condos and apartments, as well as residential customers have also been the recipients our services. We use employees and reputable subcontractors when needed. An estimate fee of $50 is charged to the customer if work is not awarded. Change orders required for work outside of the original scope of work. Payments scheduling and payment(s) based on job cost. Credit card, personal check, and cash are acceptable forms of payment. A $50 fee is charged to any customer for any bounced check HSC is issued by its bank for the customers payment. Monthly specials are gladly given to Angies List members.
Haskell Service Company, family owned and operated by Chuck Haskell since 1985, originated as a residential contracting company in Auburn, Maine before coming to Michigan in 1995 as a heavy maintenance/ fascilities contracting company. Originally meeting the needs for Meijer,Inc., HSC later performed services for businesses such as U of M Flint, national accounts such as Lowes, Barnes and Noble, Marriott Hotels, Sheraton Hotels, JoAnn Fabrics, Radio Shack, Home Goods, and World Market. Government accounts such as NOAA, US Geological Survey, and Superior Township Utilities, insurance work, property management of condos and apartments, as well as residential customers have also been the recipients our services. We use employees and reputable subcontractors when needed. An estimate fee of $50 is charged to the customer if work is not awarded. Change orders required for work outside of the original scope of work. Payments scheduling and payment(s) based on job cost. Credit card, personal check, and cash are acceptable forms of payment. A $50 fee is charged to any customer for any bounced check HSC is issued by its bank for the customers payment. Monthly specials are gladly given to Angies List members.
Frenchy'’s skirting was established in 1972 as a skirting installation company. In the mid 1980'’s we acquired the machinery to manufacture our own aluminum skirting. From there Frenchy’'s Skirting became a major manufacturer and distributor of aluminum skirting. Frenchy’'s Skirting is the largest aluminum skirting manufacturer in the United States. Frenchy's installs skirting in any residential and commercial environment with the highest quality materials and workmanship. In early 1990’'s we saw a need to manufacture and supply mobile home tie downs. We now have our own brand of tie downs, Frenchy'’s Chain Tie Down.
Frenchy'’s skirting was established in 1972 as a skirting installation company. In the mid 1980'’s we acquired the machinery to manufacture our own aluminum skirting. From there Frenchy’'s Skirting became a major manufacturer and distributor of aluminum skirting. Frenchy’'s Skirting is the largest aluminum skirting manufacturer in the United States. Frenchy's installs skirting in any residential and commercial environment with the highest quality materials and workmanship. In early 1990’'s we saw a need to manufacture and supply mobile home tie downs. We now have our own brand of tie downs, Frenchy'’s Chain Tie Down.
Licensed and insured heating, ventilation, air conditioning, refrigeration and electrical contractors since 1990. A+ rating from BBB. Design, installation and repair of all types of heating, cooling and electrical systems. Residential, Commercial and Industrial experts. Furnaces, Air Conditioning, Boilers, Geo-Thermal, Solar, Water heaters, Oil fired systems, Waste Oil, Service and repair of all makes and models, 24 hour service. Employee owned company.
"I provided a detailed review on Yelp before I found that I could post a review on the company website. 2nd time using the company and the owner Jim came out both times. In each instance, he found a solution to the problems that could have led to unneeded additional work and cost if he was not honest and professional. The first time was about 10 years ago when he came out and determined all that was needed was some Freon (it's an old unit). Added the Freon, checked out everything else, and only charged a nominal service fee plus the cost of the Freon (when it was about 1/3rd the cost of today). This time the fan motor failed and he gave instructions over the phone for me to test in order to determine what the problem was and how to keep the condensor cooled down so it would still blow cold air (the house was up to 89degrees while it was 94-96 outside. He calculated the cost for the repairs, but I opted instead to go with a new 5-ton unit to replace the 33-year old 4-ton unit I had. He stopped out, measured everything, came up with a full turn-key quote for replacing the coils, the unit, moving the electrical box to put it back to code, new hoses, pad, re-routing the plumbing on the pump used to carry the condensation away from the furnace, fabrication work on the furnace where the new coils would go. That number never changed. No new "discoveries" of additional unforeseen costs. Cleaned everything up afterward. Came out exactly at 8 am with his intern/apprentice and was done and out the driveway exactly at 1:30pm. The work done on the furnace to replace paneling to fit the new coils in looks like it came with the furnace. All clean looking and fits perfectly with the furnace and blower that sits right below it. Would use this company over and over and will recommend him to anyone looking for HVAC or electrical work. I think he has cut back on doing AC units and furnaces - just because of the physical labor involved with moving the units around, fabrication work, hauling units up and down stairs, etc. But, if you want it done right the first time - then this is who you should try to book for the job. You get the story straight from the beginning of what the problem is, what it will take to do the job right, how long until he can get it booked, and a quote that will be right on point and each component of the cost required. I suppose there are times when he runs into surprises when he gets into a job and finds a problem that was hidden behind panels, walls, or duct work - but I never had that issue."
Gary D on July 2022
Licensed and insured heating, ventilation, air conditioning, refrigeration and electrical contractors since 1990. A+ rating from BBB. Design, installation and repair of all types of heating, cooling and electrical systems. Residential, Commercial and Industrial experts. Furnaces, Air Conditioning, Boilers, Geo-Thermal, Solar, Water heaters, Oil fired systems, Waste Oil, Service and repair of all makes and models, 24 hour service. Employee owned company.
"I provided a detailed review on Yelp before I found that I could post a review on the company website. 2nd time using the company and the owner Jim came out both times. In each instance, he found a solution to the problems that could have led to unneeded additional work and cost if he was not honest and professional. The first time was about 10 years ago when he came out and determined all that was needed was some Freon (it's an old unit). Added the Freon, checked out everything else, and only charged a nominal service fee plus the cost of the Freon (when it was about 1/3rd the cost of today). This time the fan motor failed and he gave instructions over the phone for me to test in order to determine what the problem was and how to keep the condensor cooled down so it would still blow cold air (the house was up to 89degrees while it was 94-96 outside. He calculated the cost for the repairs, but I opted instead to go with a new 5-ton unit to replace the 33-year old 4-ton unit I had. He stopped out, measured everything, came up with a full turn-key quote for replacing the coils, the unit, moving the electrical box to put it back to code, new hoses, pad, re-routing the plumbing on the pump used to carry the condensation away from the furnace, fabrication work on the furnace where the new coils would go. That number never changed. No new "discoveries" of additional unforeseen costs. Cleaned everything up afterward. Came out exactly at 8 am with his intern/apprentice and was done and out the driveway exactly at 1:30pm. The work done on the furnace to replace paneling to fit the new coils in looks like it came with the furnace. All clean looking and fits perfectly with the furnace and blower that sits right below it. Would use this company over and over and will recommend him to anyone looking for HVAC or electrical work. I think he has cut back on doing AC units and furnaces - just because of the physical labor involved with moving the units around, fabrication work, hauling units up and down stairs, etc. But, if you want it done right the first time - then this is who you should try to book for the job. You get the story straight from the beginning of what the problem is, what it will take to do the job right, how long until he can get it booked, and a quote that will be right on point and each component of the cost required. I suppose there are times when he runs into surprises when he gets into a job and finds a problem that was hidden behind panels, walls, or duct work - but I never had that issue."
Gary D on July 2022
NEW OR USED STEEL STORAGE CONTAINER AVAILABLE ALL EQUIPMENTS ARE IN GOOD SHAPE, GUARANTEED MOUSE PROOF, WIND AND WATER TIGHT, CURRENTLY ON SALE USED STORAGE CONTAINERS for all your storage needs. 8 x 20ft Standard - 8.5ft Tall 8 x 40ft Standard - 8.5ft Tall 8 x 40ft High Cube - 9.5ft Tall DELIVERY AVAILABLE! ! ! MESSAGE FOR FAST FRIENDLY SERVICE...... PLEASE CONTACT TOLL: 1-800-256-2165
NEW OR USED STEEL STORAGE CONTAINER AVAILABLE ALL EQUIPMENTS ARE IN GOOD SHAPE, GUARANTEED MOUSE PROOF, WIND AND WATER TIGHT, CURRENTLY ON SALE USED STORAGE CONTAINERS for all your storage needs. 8 x 20ft Standard - 8.5ft Tall 8 x 40ft Standard - 8.5ft Tall 8 x 40ft High Cube - 9.5ft Tall DELIVERY AVAILABLE! ! ! MESSAGE FOR FAST FRIENDLY SERVICE...... PLEASE CONTACT TOLL: 1-800-256-2165
Sheet metal stamping and pressing are specialized manufacturing methods in which custom dies and powerful stamping presses transform flat metal sheets into precisely shaped components. These techniques form designs with embossed, coined, or flanged edges for high-quality, mass-produced parts. The process employs advanced tooling to convert raw metal into accurate, finished products efficiently while ensuring cost-effective production for both single and low-volume projects. By applying controlled force, fabricators achieve superior design accuracy and consistent quality.
Attempting to stamp metal at home is neither safe nor effective for shaping construction-grade materials. The process requires professional-grade stamping presses and custom tooling that are not replicable with household tools. Professional fabricators utilize heavy-duty machinery in controlled workshop settings to apply precise force and achieve quality results. While some metals can be bent by hand for simple tasks, attempting full-scale stamping at home poses risks of injury and subpar performance. It is advisable to rely on trained experts for secure and accurate metal fabrication.
Stainless steel stands as the most common sheet metal because its durability, weather resistance, consistent performance, and affordability make it ideal for construction projects. Its excellent resistance to damage and harsh weather conditions ensures long-lasting quality, making it the top choice among homeowners and professionals. The material’s reasonable cost range of $8 to $19 per square foot further reinforces its reliability in various building applications.
To obtain an accurate quote for sheet metal fabrication, provide detailed project specifications to a professional fabricator. Supplying exact dimensions, angles, and intended uses enables experts to produce precise estimates. Qualified fabricators utilize advanced drafting software and thorough project planning to convert your requirements into an exact quote that reflects the true scope of work. Engaging a professional ensures that all measurements and design details are accurately documented, resulting in a reliable price estimate without unexpected costs.