Brick & Concrete Patio Paver Installers in Edmond, OK

Recent Job Requests for Concrete Contractors in Edmond, OK

• Project Location: Edmond, OK

  Date: 01/15/24

  Type of Project: New pavers

  Comment: Need an estimate to lay about 270 sq ft on dirt, and about 320 sq ft of concrete
• Project Location: Edmond, OK

  Date: 01/13/24

  Type of Project: New pavers

  Comment: Lay pavers on dirt on uneven ground. 1. Identify and Measure the Site Before installing the pavers, you must ensure that the ground is ready. Plot out the section you intend to install pavers on and outline it with the stakes using the measuring tape. Take note of the site's square footage to calculate how many pavers to buy accurately. Remember to gauge the slope. The pavers should slope slightly to avoid water pooling. 2. Excavate the Paving Area Ensure that you remove any grass or weeds. Use a shovel to dig deep and get rid of the roots to avoid future growth. The excavated section should be deep enough to take in gravel, sand, and the pavers. patio pavers on dirt patiocomfy.com Tip: After removing the grass, you can transplant it on the bare areas of your yard. 3. Level the Paver Base With Dirt For your pavers to line up well, you should place them on a level surface (using a layer of sand). Also, make sure you get clean dirt from a reputable supplier to avoid topsoil. Topsoil has organic matter, which changes its volume over time. The ideal option would be to use a gravel base instead of dirt. Gravel contains less moisture and compacts effortlessly. Laying the Pavers When laying the pavers, the following steps should be followed: 4. Building the Paver Base Fill the excavated section with about six inches of gravel. Next, spread the base material evenly across the paving area before wetting it using a garden hose. Run the plate compactor or hand tamper across the area to turn it into a firm, even layer. After compacting the ground, it should be stabilized and even, just waiting for your pavers. The more packed the bedding sand is, the more stable it'll prove for your pavers. Add a thin layer of paver sand to the paver base. Ensure that the surface is evenly smoothed out to make it leveled. You can use a wooden board to do that. 5. Lay the Geotextile Fabric Over The Soil The next crucial step is placing pieces of landscaping or geotextile fabric, mai