Get matched with top gas piping pros in your area

"Bath Planet's customer service team went above and beyond to ensure our satisfaction. They were friendly, knowledgeable, and always available to answer our questions. We are very pleased with our new shower!"

"We attempted to have our unfinished basement finished in 2020. The project started in June of 2020 and was terminated unfinished in January of 2021. Total cost of the partial project was $75,771. Several issues led to the termination of the project. The primary was lack of actual project management and ability to take responsibility for errors by the contractor, which, in addition to being frustrating, contributed to the unnecessarily long project time of 7 months while still not being finished. Examples include: - An I-Beam for a heavy-bag track was to be installed on the ceiling. It was installed in the incorrect location and extremely poorly, to the point where flanges were overlapping. When confronted, the contractor stated that it just "wasn't finished". However, the correction required the complete removal and re-installation. Then the contractor claimed the issue was due to insufficient instruction supplied, even though all required information was in fact supplied. The installation crew was simply not competent and failed to install as instructed. - Wood panels were put on a large portion of the ceiling. Several conversations in writing instructed that there was to be no more work done after the initial paint as we liked the look as is. When painters were on-site for the walls, it was confirmed with them verbally that the ceiling was complete and not to perform work on them. However, they caulked and painted it anyway. When confronted, the contractor stated it was always known that this work was to be done. He also said it was only painted and not caulked, which was clearly not the case. Additionally, when shown texts and emails where we explicitly requested no more work done to the ceiling and that he also stated it was complete, he simply ignored it. - When ordering a vanity, he sent us to a shop to select one. However, when it came time to need the vanity, we found it had never actually been ordered. The contractor blamed us for not ordering it while at the shop, however the person at the shop later confirmed the hold up was the contractor not confirming the order. These are some of the biggest examples, but there were communication issues throughout the project. The termination of the contact didn't go any better than the rest of the project. We were told up front, in writing, that we would be billed for all services each week for the prior week. However, when we were settling up after the contract was terminated, there were many costs he was back charging for, meaning they were not billed during the week of work as the original contract stated. One of the items had no reciept. One of the bigger issues here was the painting. The painting cost was much too high relative to the original bid price based on actual work performed. When asked for an itemized bill for painting, it included painting work that had not been performed. The contractor ultimately removed the item for which he didn't have a receipt and reduced the paint cost by some amount. It was still not correct, but we agreed to pay to end the situation."

"It went great. We experienced several weather events but Steve was able to complete the project in a timely fashion. It looks great and we think will enjoy it for a long time. There are always challenges with adding anything new to old but Handy Steve was able to work through each issue. My neighbors kept showing up in the evenings and they commented about how clean the worksite was. Steve was easy to work with and I plan on hiring him again this fall for another project."

"This was amazing! I had no idea this service existed. After searching and contacting various repair places for my washer, this was the most cost effective option. I figured if it didn't work, my machine is old and I would be out $40, not the $100+ to have a tech come out and just diagnose the problem. I am pretty handy and my washer is old anyway, so if it is broken, I have to get a new one anyway. My tech, Steve, was great! He predicted what was wrong after listening to the machine, calmly walked me through dismantling the machine and when we got down to the motor, he was right! He sent me a link to the part I would need, and let me know to contact them again if I needed help installing it. My machine works even better than before it broke, its beautifully quiet and efficient. I will definitely be saving this company for any future repairs on appliances I may need. The service was $40 + the part cost, which was about $8."